Q&A / 

Toilet Tank Leak – No Leaning!

toilet tank leak

Toilet Tank  Leak | The gap you see between the toilet tank and the wall should be shimmed if you want to lean back against the tank. (C) Copyright 2020 Tim Carter

Toilet Tank Leak - Don't Lean Against The Tank

QUESTION #1: An unnamed person (rhymes with house) living in my home says that the toilet seat lid and the toilet tank are made for leaning back against while using the fixture for personal needs. In a negotiation debate with this person, I mentioned that the bolts fastening the tank to the bowl aren’t strong enough for leaning as one might against a standard chair. What say you, oh wise Tim? Do you arbitrate these touchy discords between coinhabitants on a frequent basis? Donn R., Shelby Twp, MI

I live in New Hampshire and mice are as common indoors in the winter as snow is outdoors. That said, I’ve never known one to be able to use a toilet. Oh, wait, Donn isn’t talking about a mouse! Truth be told I adjudicate disputes, or should I say spirited discussions, between two people living under the same roof at least once a month.

RELATED LINKS

Toilet Sewer Odors

TOP TEN DIY Toilet Fixes

CLICK or TAP HERE to get FREE Quotes from LOCAL handymen that can stop toilet tank leaks.

I’ve been a master plumber since age 29. It’s important to realize I’ve installed more toilets than I care to remember. The traditional toilet used to have just two brass bolts that connected it to the toilet bowl. One manufacturer years ago thought this was insufficient and developed a three-bolt design. The third bolt added lots of strength.

Why Would a Toilet Tank Leak?

All that said, the bolts in either design are plenty strong and should never break if someone leans back against the tank while sitting on the toilet bowl. It’s the rubber o-rings that surround the bolts that are the issue. It’s entirely possible to create a leak between the toilet tank and bowl if you push back against the tank too much.

This is quite possible as the toilet ages and the rubber o-rings become less pliable. I’m sure you’ve seen rubber that becomes brittle with age. You don’t want to hope that the rubber o-rings stay supple indefinitely. You hope for things you can’t control like the weather or when a volcano might erupt.

Should A Toilet Tank Be Snug Against a Wall?

Plumbers can install toilets so the tank is snug against a wall, but this requires quite a bit of planning. What’s more, if the tank is tight against the wall, the tank lid might not fit well because the lids are larger than the tank and often have an overhanging rear lip.

How Can I Fix The Tank?

It’s easy to keep peace in these situations. When the leaning coinhabitant is out and about having coffee with a friend or picking up materials from the grocery store, you can glue some wood shims between the back of the toilet tank and the wall behind the tank.

You can use wood paint stirring sticks, regular tapered wood shims, and construction adhesive that comes in a standard caulk tube to accomplish this simple keep-the-peace fix. The key thing to remember is to be sure the shims are about 1/2-inch below the top of the tank lip so the tank lid doesn’t touch the shims when you put it back on.

CLICK or TAP HERE to get FREE Quotes from LOCAL handymen that can stop toilet tank leaks.

Column 1337 Part 1

SPONSORS / 

6 Responses to Toilet Tank Leak – No Leaning!

Leave a Reply

You have to agree to the comment policy.