Painting New Wood Siding
DEAR TIM: We are in the process of building a new home which will have redwood siding and trim. We are going to paint the new house. The painting contractor mentioned in her quotation that all of the exterior siding, trim, and other wood should be backprimed. What is backpriming? Is it necessary and / or worthwhile? M. S.
DEAR M. S.: As long as you feel that her quotation is in order, give her the job! She is one of the few painters I know of who really is on top of her game. Backpriming is absolutely necessary on redwood. It is also an excellent idea for any exterior wood siding or trim.
Backpriming is really a very simple procedure. It simply means painting the back side and all other hidden edges of a piece of wood. Just think of it as a basic form of plastic shrink wrapping. Very few painters take the time to do this extremely important step.
However, it is not always the painters fault. Builders must allow the painters sufficient time and space to perform this task prior to the installation of the wood by the carpenters.
Backpriming can dramatically extend the life of the initial and all subsequent paint jobs. For this reason alone it should be seriously considered. Backpriming extends the life of a paint job by virtually eliminating the possibilities of paint peeling and blistering.
CLICK HERE to get FREE & FAST BIDS from local painters who can paint your new wood siding.
Here is how it works. Water, for the most part, can easily enter and exit wood. The structure of wood makes this possible. That is how the water from the soil gets up to the leaves while a tree is alive. However, this property is a negative quality when the wood is on your house.
Under normal atmospheric conditions, water wants to evaporate. That is why people hang clothes up to dry. This same thing will happen to a wet piece of wood. If the wood does not have a coating on it, it really isn't a problem.
However, if something gets in the way of the water which is trying to evaporate, the water vapor will simply push it out of the way. This effect can be dramatic with highly flexible latex paints. Evaporation can create a high enough vapor pressure behind the surface of the paint so as to create a bubble not unlike that of bubble gum.
Paints are simply coatings. Many are sold on the basis of their effectiveness in protecting wood from water and the elements. The trick is to use this technology to your advantage. By applying paint to an entire piece of wood, you make it extremely difficult for water to enter the wood in the first place. This process is not as difficult as it sounds.
An advantage to backpriming is that it can be done on the ground and very quickly. If you plan your work, have the weather on your side, and have plenty of room, it goes very quickly. Simply set up some saw horses or a large painting platform and get out the roller or spray equipment.
Rolling or spraying the paint will make fast work out of this process. First, paint the side of each board which will not be seen after it is installed and all edges. Set aside to dry. After the paint is dry, paint the remaining unfinished side.
However, glide a paint brush over this side after you have applied the paint. This will give it the texture of a hand brushed application. Hand brushed finishes tend to look more professional.
I also recommend applying the second coat on the ground as well. By doing this, the painter usually only has to set ladders and scaffolding one time. This is safer and quicker. Finally, don't forget to leave a brush and some paint for the carpenters. Every time they cut a piece of wood, the cut edge must be sealed.
These cuts usually expose the wood's end grain. End grain is the easiest and fastest way for water to enter wood. If this end grain is not sealed, all of your work and effort will be wasted!
You never really appreciate how smooth a painting job can go -- and how much better it can look and how much longer it can last -- until you sit back and watch a pro at work. And even then, you're usually hard-pressed to duplicate your painter's prowess on the next project. This book will change all that. House Painting - Inside and Out is written by two men who are eager to show you what they have learned from years of professional painting experience.
With their help, you can avoid common mistakes, learn everything you need to know to get professional results, and pick up time-saving tricks of the trade along the way. You'll learn how to assess and plan a paint job,choose everything from the right paint to the best brushes, rollers, scrapers, and sanders for your job, professionally prepare every kind of interior and exterior surface, whether you are painting new or old drywall, woodwork, plaster, siding, stucco, aluminum, or vinyl - brush, roll, spray, and touch up all these surfaces, work--and clean up--safely, responsibly, and efficiently. There's even a gallery of great paint jobs to show you what you are capable of. It is published by the Taunton Press, a company with the highest quality standards. I highly recommend this book.
CLICK HERE to get FREE & FAST BIDS from local painters who can paint your new wood siding.
Column 030