Q&A / 

Ceramic tile installation in your bathroom can be a great remodeling job. Be sure your waterproof wall behind the tile is cement board. Consider installing a seamless vapor barrier, also.

READ THE ANSWER »

If you want to know how to install ceramic tile in your bathroom or any room, be prepared for some work. It can be fun, and it may become your favorite job. With luck, your walls are plumb and level to make the job go smoothly. Use some of my tips and your ceramic tile installation will look great.

READ THE ANSWER »

If you are about to build a ceramic tile shower, you better pay close attention to details. A ceramic tile shower that has tile for the floor must be built with a special membrane that diverts water to the drain. Installing ceramic tile in showers may be easy, but don't underestimate the work involved to install the special liner so it is 100 percent waterproof.

READ THE ANSWER »

Ceramic tile salvage can be done with a great deal of patience. Grout removal should be done gently to avoid damaging ceramic tile. The next step will be prying the tile loose from its base. Then clean it up and your ceramic tile reinstallation should go very well.

READ THE ANSWER »

Install ceramic tile successfully when the tile is laid on a level surface. Floor leveling compounds will help with this. Use drywall finishing tools to get a glass like surface.

READ THE ANSWER »

Remove grout mess with a few sticks of oak, a nylon pad and a grout sponge. The tile grout can be smoothed out and the grout lines will look like new.

READ THE ANSWER »

Using reinforced concrete can keep your ceramic tile from cracking. Have your builder use reinforcing steel while building your home. You can also have him install crack isolation membrane between the ceramic tile and the concrete. Some ceramic tile repair is readily completed with clear epoxies.

READ THE ANSWER »

Tile adhesive will set better on a cold rather than hot surface. The coolness of the surface allows the thinset not to dry out before it has a chance to bond. Be sure to keep the tile, thinset and surface temperature between 45 and 70 F for at least 12 hours.

READ THE ANSWER »

Is your current plastic laminate top scratched and possibly sporting a couple of burn marks? If it is a square-edged top, it is possible to apply ceramic tile right on the laminate. The toughest part of the job is simply dealing with the sink. You can do this job!

READ THE ANSWER »

SPONSORS /